1. NET Help-Center
  2. NET Engineering
  3. Data import and export
  4. NET Build Integration
  5. Export to NET Build
  6. Transferred attributes

Transmitted attributes

Version NET 14.2

General - ‘Master data’ for each element

  • Name
  • Region
  • (User-defined) length
  • (Location) from
  • (Location) to
  • Category (design element type)
  • Address
  • Geometry

Design Element Type "Segment"

Name Description Example
UID <document_name>#<FID Database name#12345
CO_NAME Name of the corresponding CO area CO 1
DP_NAME Name of the corresponding DP area DP 1.1
DEPTH DEPTH 60 cm
USAGE Use of the segment Main segment, distribution network segment 
DUCTS Table with information on the pipes in this section of the segment. see DUCTS
DIRECT_CABLES Table with information on the cables in this segment section. Is only filled for underground/above-ground cables. TKI.04.02
CONSTRUCTION_TYPE
 		 Contruction type
 		 Horizontal Directional Drilling
 
SURFACE_TYPE surface Concrete block pavement
STATUS Status of the object Reserve


Design Element Type "LeadinSegment"

Name Description Example
UID <document_name>#<FID Database name#12345
CO_NAME Name of the corresponding CO area CO 1
DP_NAME Name of the corresponding DP area DP 1.1
DEPTH DEPTH
 		 60 cm
DUCTS Table with information on the pipes in this section of the segment. see DUCTS
LEADIN_CONNECTIONS Table with information on the ducts branches required for this house connection. see LEADIN_CONNECTIONS
DIRECT_CABLES Table with information on the cables in this segment section. Is only filled for underground/above-ground cables. TKI.04.02
CONSTRUCTION_TYPE Contruction type Horizontal Directional Drilling
SURFACE_TYPE surface Concrete block pavement
STATUS Status of the object Reserve
ADDRESS_ID UID of the building for grouping-purposes Database name#12345


Design Element Type "DuctBranch"

Name Description Example
UID <document_name>#<FID Database name#12345
DUCT_BRANCH_
CONNECTIONS 		Table with information on the duct branches that are to be connected at the point. see DUCT_BRANCH_CONNECTIONS
CO_NAME Name of the corresponding CO area CO 1
DP_NAME Name of the corresponding DP area DP 1.1
NAME The name of the pipe node. If no name is set, the name : DuctBranch {FID} is generated here. Virtual DuctBranch 75126957
STATUS
 		 Status of the object
 		 Reserve
 


Design Element Type "Building"

Name Description Example
ADDRESS Adress Dorfstr. 1A
BLDG_TYPE Building type
 		 single demand unit
 
CITY City Chemnitz
STREET Street example road
HOUSENUMBER Housenumber 1
SUFFIX Suffix / house number addition
 		 A
POSTCODE Postcode 09117
RU Number residential units 1
CU Number commerical units
 		 0
DP_NAME Name of the corresponding DP area DP 1.1
CABLES Table with information on the cables that end at the building. see CABLES
SPLICE_PLAN Table with information on the splice information. No entry is created for open fibres. see SPLICE_PLAN
ABBREVIATION Abrreviation Street / housenumber / suffix
 		 ER1A
PROVIDED_BY
 		 Table with information of the provider(s)
 		 see PROVIDED_BY
 
ADDRESS_ID UID of the building for grouping-purposes Database name#12345


Design Element Type "BuildingUnit"

Name Description Example
FID_Building FID of building in NET Engineering 12345
BLDG_TYPE Building type single demand unit
CITY City Chemnitz
STREET Street Curiestr.
HOUSENUMBER Housenumber 19
SUFFIX Suffix / house number addition B
POSTCODE Postcode 09117
UNIT_NR Unit-ID 5
DP_NAME Name of the corresponding DP area DP 1.1
CONNECTOR_NR Number of connector 1
BLDG_UNIT_TYPE Type of building type residential unit
 
ADDRESS_ID UID of the building for grouping-purposes Database name#12345


Design Element Type "DistributionPoint"

Name Description Example
ADDRESS Adress Curiestr. 19
NAME Name of DistributionPoint DP 1.1
TYPE Type of DistributionPoint DP
 
SPLICE_PLAN Table with information on the splice information. No entry is created for open fibres. see SPLICE_PLAN
STRUCTURE Relation to the structural system (cabinet or manhole) DP 1.1
STATUS Status of the object Reserve


Design Element Type "TerminationPoint"

Name Description Example
ADDRESS Adress Curiestr. 19
NAME Name of TerminationPoint
 		 CO 1
TYPE Type of TerminationPoint
 		 CO
SPLICE_PLAN Table with information on the splice information. No entry is created for open fibres. see SPLICE_PLAN
STATUS Status of the object Reserve


Design Element Type "CableSection"

Name Description Example
NAME Cable name
 		 HK 1.1
CABLE_CATEGORY Cable Category Feeder Cable
 
BLOWING_INFO Table with information on the pipe section of the cable see BLOWING_INFO
TYPE Cable type 12f
STATUS Status of the object Reserve
FROM_DE
 		 From
 		 PoP 1
 
TO_DE
 		 To
 		 DP 1.1
 
RESERVE_START

Cable reserve for the cable at the start node

 20.5
RESERVE_END Cable reserve for the cable at the end node 2
ADDRESS_ID UID of the building for grouping-purposes Database name#12345


Design Element Type "Cabinet & Manhole"

Name Description Example
NAME Name of Cabinet / Manhole
 		 KSch. 1B
ADDRESS Adress Curiestr. 19
TYPE Type of Cabinet / Manhole
 		 manhole
STATUS Status of the object Reserve


Table "DUCTS"

Name Description Example
NAME duct name Y.16.05
TYPE duct type SRV7 x10/6
COLOR1 duct color 1 blue
COLOR2 duct color 2
 		 yellow
PIPE_NAME Designation of the protection pipe if the pipe is located in a protection pipe
 		 pipe 1
PIPE_TYPE Pipe type
 		 DN50
PIPE_POSITION Pipe position
 		 1


Table "BLOWING_INFO"

Name Description Example
START_NODE_NAME Name of start node CO.Y
DUCT_NAME duct name
 		 RV.Y.01
DUCT_COLOR1 duct color 1 blue
DUCT_COLOR2 duct color 2
 		 yellow
DUCT_POSITION Duct position
 		 5
END_NODE_NAME Name of end node
 		 Ksch.Y.10
LENGTH length from start to end
 		 1.038,31


Table "LEADIN_CONNECTIONS"

Name Description Example
DUCT_1_NAME Name of the duct from which the branch is made. Y.18.01
DUCT_1_POSITION Position of the pips in the duct. 5
DUCT_2_NAME Name of the branching house connection pipe
 		 Y.18.01.05
DUCT_2_POSITION  Probably mostly empty if individual pipes branch off to the house. Otherwise the same logic as for Duct 1. -


Table "DUCT_BRANCH_CONNECTIONS"

Name Description Example
TYPE Kind of connection:
-BUNDLE_BUNDLE 
- BUNDLE_SINGLE 
- SINGLE_SINGLE 		SINGLE_SINGLE
DUCT_1_NAME Name of first duct / pipe Y.18.04
DUCT_1_POSITION Position of pipe in the first duct 6
DUCT_2_NAME Name of second duct / pipe Y.18.04a
DUCT_2_POSITION Position of pipe in the second duct 1


Table "CABLES"

Name Description Example
CABLE_NAME Cable name
 		 K.Y.17.05.03
TYPE Cable type A-DQ(ZN)2Y 1x12 12F VzK
LENGTH Cable length 110,23
DUCT_NAME Name of the pipe in which the cable is located. (Only if there is more than one pipe ending at the Home connection) Y.17.05.03
TERM_NAME Name of Termination Point
 		 GfAP.Y.17.05.03
TERM_TYPE Type of Termination Point BUDI-2S (1AE)


Table "DIRECT_CABLES"

Name Description Example
CABLE Reference to a cable (Design Element) K.Y.17


Table "SPLICE_PLAN"

Name Description Example
CABLE_A_NAME Cable name A HA.1.5.46.1.6
FIBER_A_NR fiber number in Cable A  1
TRAY_NR Number of tray 1
CLOSURE_SIDE Closure side A / B
 		 A
TRAY_TYPE Type of tray
 		 5 mm splice tray
 
POSITION_IN_TRAY Spliceposition in tray 1
CABLE_B_NAME Cable name b
 		 HA.1.5.46.1.7
FIBER_B_NR fiber number in Cable b
 		 2
CONNECTOR_NR Connector number if fibre is spliced to connector
 		 2
CONNECTOR_TYPE Type of connector LC/APC
SPLITTER_NAME Name of splitter SP.1.5.46-1
SPLITTER_TYPE Type of Splitter Splitter 2:32
SPLITTER_PORT Splitter port
 		 1

 

Table "PROVIDED_BY"

Name Description Example
PROVIDER Name of the provider
 		 NVt 1.1