Release Notes NET 15.3 (English)

Note for NET Scan Customers

Customers using NET Scan are requested to contact our Support team before installing this update. This allows us to verify whether the installed NET Scan version is compatible with the new software version and to determine whether any additional steps are required.

Summary

With Release 15.3, TKI introduces significant enhancements to fiber optic network planning: the integration of atesio STRATEGIC 2025 in NET Design, extensive improvements to the NET Scan data model with automated geometry synchronization, and numerous optimizations to the Redlining data transfer. This release focuses on more efficient planning workflows, improved data quality, and a stronger connection between field surveys and planning.

🌞Highlights

Support for atesio STRATEGIC 2025 – NET Design now supports the latest version of atesio STRATEGIC 2025 for automated network calculation.
Extended NET Scan import settings – The general import now offers additional options for NET Scan, including loading databases, selecting multiple project areas, and controlling survey geometry and master data.
Detailed import protocol – A detailed protocol is now available directly in the import UI, improving traceability of import operations.
Enhanced Cable Schema Plan – The Cable Schema Plan now offers status filtering, device type display, and toggling between as-is and to-be views via work orders.

🚀 Further Improvements

Automated geometry synchronization in the NET Scan data model
New validation for unconnected subnets (islands) in NET Scan Redlining
Numerous improvements to the Redlining data transfer to NET Engineering

This release extends the bridge between field surveys and network planning and provides improved tools for more efficient planning and higher data quality.

Supported Software

Autodesk AutoCAD Map 3D
- Autodesk AutoCAD Map 3D 2024.0.2 - Autodesk AutoCAD 2024.1.8
- Autodesk AutoCAD Map 3D 2025.0.2 - Autodesk AutoCAD 2025.1.3
- Autodesk AutoCAD Map 3D 2026.0.3 - Autodesk AutoCAD 2026.1.1
TKI PostgreSQL Provider 5.2 and later
Comsof Fiber Designer 2019.2.2 - Comsof Fiber Designer 22.2
Comsof Fiber 23.1 - Comsof Fiber 25.1
atesio STRATEGIC 2020 - 2025
TKI Lizenzierung 14.0
(Only required for a manual installation on the network license server)

The specified versions for Autodesk AutoCAD and Map 3D are the ones for which NET was developed. Generally, newer versions can also be used. However, there have been occasional updates in the past that caused crashes in NET.

Release NET 15.3 in Detail

NET Design

atesio Integration

Atesio STRATEGIC 2025 is now supported.
The atesio calculation now correctly generates complete splice information for projects where connected devices are located at the same geometric point. This ensures that all expected splice entries are available and prevents downstream issues during conversion.
When importing atesio output workspace, NET Design now handles mismatched input and output data more clearly. Instead of an exception, users receive an error message explaining that the input data no longer matches and a new calculation is required.

Comsof Fiber Integration

When importing preprocessing results from Comsof, AutoCAD Map 3D would sometimes become unresponsive for extended periods while processing large datasets. The data now loads reliably and within a reasonable amount of time, without the application entering a freeze-like state.

NET Engineering

General

When adjusting segment and duct assignments, repeated highlighting of invalid geometries now zooms to each problem location one after another.

Import

In the general import, additional settings are now available for NET Scan import, including loading available databases, selecting multiple project areas, defining survey geometry, and handling master data.
In the general import, the data preview now loads faster when reopened without changes.
In the general import, metadata from imported files is now cached, allowing the data preview for large files to load faster.
In the general import, records can now also be imported if related domain values are empty in the input file.
Infas imports are now only available via the general import. The option to start them from the industry model context menu has been removed.
In the general import, a detailed protocol is now visible directly in the protocol UI.
In the general import, validation has been added for fiber optic ONTs and fiber optic splitter data to check the required assignment.
In the general import, GeoPackage files with empty geometries can now be used without an error message.
During the import of OSM road centerlines, the error window can now be closed correctly after cancelling.
Error handling for relations during general data import has been improved. If a value to be imported (e.g., an FID) does not exist in the database's target table, the corresponding field is now intentionally set to empty. At the same time, a descriptive warning message is generated in the import log, allowing missing relations to be identified and corrected immediately. Previously, these fields remained empty without providing any feedback to the user.
In the general import, invalid geometries are now shown in the protocol without displaying an error report.
In the general import, an error message is now displayed if an ONT is not assigned to either a building or a building unit.

Workflows

When removing duct fittings in the duct connection editor, moved fittings are no longer incorrectly interpreted as duct insertions.

Planning and House Connection Assistant

In the planning assistant, perpendicular house lead-in segments are now created more accurately based on the termination point.

Dialogs

In NET Engineering, the standard value "Street segment" is now available for segment categories.
For FO ONTs, the date fields "Creation date" and "Shutdown date" are now available in the standard data model.
In the building form, linked building units can now be opened via the projection button.

Reports

The CO overview now includes the FID for ONT elements.
Splitters will now be displayed by their name in the detailed splice plan. Unnamed splitters will be identified by their position.
The Cable Schema Plan now supports filtering objects by status, displaying device type and status labels directly in the plan, and toggling between as-is and to-be views by considering work orders. All new settings default to the previous behavior.
The performance of the "Splice overview closure" report has been improved.
Reports now display correctly and completely for all Windows display scaling settings (including >100%).

GIS-Nebenbestimmungen

In the GIS-NB export, the error summary now includes additional information about the GIS-NB version and phase used.
For the BMVI export (BW), a field length validation for duct types has been implemented. Since the fields for other duct types (LR_BB_Son, LR_VN_Son, LR_EA_Son) are limited to a maximum of 50 characters according to the specification, the system now ensures before export that this length is not exceeded. If the combined duct types are too long, a corresponding error message is displayed.
An error occurring during the structure update in GIS-NB (NET Engineering) has been resolved. Due to technical changes, SQL queries ending with a semicolon were no longer processed correctly, causing the update to fail. The affected report definitions have been corrected, ensuring the structure update now completes without errors.

Import from NET Build

For automated import from NET Build, a new option for updating existing RL measurements is now available in IMBatch.
During import from NET Build, ONTs can now also be imported into Redlining.

Export to NET Build

During export to NET Build, ONTs are now natively supported and considered for buildings and building units.
During export to NET Build, validations can now be cancelled without causing Map 3D to crash.

Redlining

In the NET Scan data model, the new "Constructed on" attribute is now available for additional object classes and is considered during the transfer to Redlining and NET Engineering.
In the ONT form, RL attributes can now be created and RL ONT considered in the general import.
In NET Redlining, the view for RL structures has been extended with the name of the structure type.
In Redlining forms, objects with linked geometry can now be highlighted directly on the map.
In the TKI NET Scan fiber-optic data model, scan ducts can now be linked directly to other scan ducts. This enables duct relationships and network structures to be represented and documented more flexibly.
In NET Redlining, segments can now be split while related attributes are transferred correctly.
After Redlining data transfer, an additional option is now available for controlling the creation of duct insertions.
Geometry synchronization in the NET Scan data model has been automated. Linear objects such as cables, ducts, and protection pipes now automatically inherit the geometry of their assigned segment. When the segment's path is modified or an object is reassigned to a different segment, the geometry of the affected features is updated consistently. This reduces manual effort during network planning and ensures that the spatial location of infrastructure components always aligns with the segment routing.
Project areas in NET Scan can now be activated/deactivated in the data model. Deactivated project areas are no longer considered when automatically assigning newly digitized objects. This allows completed project areas to be effectively "archived" so that new captures in the same area are assigned to the correct (active) project. Existing project areas remain active by default.
During Redlining data transfer to NET Engineering, additional attributes such as Info and user length are now transferred.
A new validation for checking unconnected subnets (islands) has been implemented for NET Scan Redlining. This feature helps planners quickly identify gaps in the trench network to ensure a fully closed network. The validation lists all existing subnets, taking the project's spatial tolerance into account. Users can highlight the affected trenches in the map directly from the list or open the corresponding form for editing. This check is exclusively available for the NET Scan Redlining data transfer.
During Redlining data transfer, the new "Link ONTs" action is now available to create ONTs in NET Engineering and assign connectors.
The structure update for the Redlining module has been stabilized. An issue that could cause the update to fail during repeated executions has been resolved. The database structure update can now be performed reliably and as many times as needed, even if certain tables have already been removed.
During Redlining data transfer, inner ducts are no longer created or assigned multiple times.
During Redlining data transfer, multiple technically separate ducts are now correctly retained as separate ducts.
During Redlining data transfer, multiple ducts with identical properties are now correctly retained as separate ducts.
During Redlining data transfer, single-part house lead-in trenches with priority "main trench" are no longer unnecessarily split into multiple segments.
During import from NET Build, existing survey points are now correctly matched and are not created again.
A bug in the Redlining import from NET Build has been fixed that occurred when objects had no custom attributes. The import of planning data now runs stable for these objects as well.

Documentation Pack

Checklists in DocPack now feature a context menu with "Select all" and "Deselect all" for quick bulk toggling.
Fixed an issue where the AutoCAD error "eWrongDatabase" occurred when outputting the cable schema plan via the Documentation Pack.

Validation

Double-clicking a validation message in the project validation dialog opens the associated form and highlights and zooms to the affected object.
A new setting has been added to the NET options to control the validation of start and end points for duct and cable geometries. By default, the system checks whether terminators, closures, duct insertions, and fittings are located exactly at the start or end point of the associated geometry. By disabling this option, users can suppress this check if specific workflows intentionally allow deviations between point objects and line ends. This prevents unnecessary error messages during geometry validation in projects that do not require exact point-to-endpoint conformity.
The project validation dialog now remembers its window position and size. When reopened, it appears at the same location and with the same dimensions as before.

NET Operations

General

The notification text for transferring services to the network path via filter has been corrected. The dialog now correctly indicates that services are being added instead of removed.

Network routing

Fixed incorrect cassette assignment for cassettes newly created by the network route search, ensuring they are now assigned to the correct device.
When creating a network path across switching points, an incorrect error message was displayed. The path was created successfully, but the message was confusing. This has been fixed.

We don't have a way to export this macro.

Datamodel Changes since NET 15.0

NET Engineering

Base Datamodel

15.1

New columns in the Breakdown table (TC_BREAKDOWN)
- PLACEMENT_DISTANCE

15.2

No datamodel changes – structure update only for new dialogs and reports

15.3

New domain value in the Segment Category table (TC_SP_SEGMENT_TYPE_TBD)
- Id=3, Value: "Street segment"

Duct Datamodel

15.1

No datamodel changes – structure update only for new dialogs and reports

15.2

No datamodel changes – structure update only for new dialogs and reports

15.3

No datamodel changes – structure update only for new dialogs and reports

Fiber Optic Datamodel

15.1

View TC_REP_CABLECOSTS updated
- New column CATEGORY contains the status category

15.2

No datamodel changes – structure update only for new dialogs and reports

15.3

New columns in the FO ONT table (TC_FO_ONT)
- DATE_CREATION (Date) – Creation date
- DATE_SHUTDOWN (Date) – Shutdown date
- FID_TNIM_SOURCE (Number(10,0)) – Source datastore, foreign key to TNIM_SOURCE.FID
- TNIM_SOURCE_KEY (Varchar2(255)) – Source ID

Telephony Datamodel

15.1

No datamodel changes – structure update only for new dialogs and reports

15.2

No datamodel changes – structure update only for new dialogs and reports

15.3

No datamodel changes

Redlining Datamodel

15.1

No datamodel changes – structure update only for new dialogs and reports

15.2

New attributes in TC_RL_CABLE
- INFO (Varchar2(500))
New attributes in TC_RL_CLOSURE
- INFO (Varchar2(500))
New attributes in TC_RL_DUCT
- INFO (Varchar2(500))
New attributes in TC_RL_FITTING
- INFO (Varchar2(500))
- NAME (Varchar2(255))
New attributes in TC_RL_SEGMENT
- USER_LENGTH (Number(20,8))
- WIDTH (Number(20,8))
New attributes in TC_RL_STRUCTURE
- INFO (Varchar2(500))
New attributes in TC_RL_TERMINATOR
- INFO (Varchar2(500))
FID_SCAN column and foreign key relationship to TC_RL_SCAN removed from: TC_RL_CABLE, TC_RL_CLOSURE, TC_RL_DUCT, TC_RL_FITTING, TC_RL_MEASUREMENT_LINE, TC_RL_MEASUREMENT_POINT, TC_RL_SEGMENT, TC_RL_STRUCTURE, TC_RL_TERMINATOR
Feature class TC_RL_SCAN has been completely removed (moved to the separate NET Scan datamodel)
Domain table TC_RL_SCAN_POS_QUALITY_TBD has been completely removed

15.3

New table TC_RL_ONT (attribute table without geometry)
- CONNECTOR_NR (Number(10,0))
- DATE_CREATED (Date)
- DATE_MODIFIED (Date)
- FID_MEASUREMENT (Number(10,0)) – Foreign key to TC_RL_MEASUREMENT.FID
- FID_RL_BUILDING (Number(10,0)) – Foreign key to TC_RL_BUILDING.FID
- ID (Varchar2(100))
- NAME (Varchar2(100))
- SOURCE_OBJECT (Varchar2(255))
- TYPE (Varchar2(255))
- UNIT_NR (Number(10,0))
- USER_CREATED (Varchar2(50))
- USER_MODIFIED (Varchar2(50))
Data migration: ONT data (ONT_TYPE, ONT_NR, UNIT_NR, CONNECTOR_NR) is migrated from TC_RL_BUILDING_UNIT to the new TC_RL_ONT table
Removed columns from TC_RL_BUILDING_UNIT
- ONT_NR (Number(10,0))
- ONT_TYPE (Varchar2(255))
New column in TC_RL_CLOSURE
- DATE_COMPLETION (Date) – "Constructed on"
Label of DATE_COMPLETION on TC_RL_SEGMENT, TC_RL_STRUCTURE, and TC_RL_TERMINATOR updated to "Constructed on"
New foreign key relationships
- TC_RL_ATTRIBUTE.FID_FEATURE → TC_RL_ONT.FID
- TC_RL_MEASUREMENT_POINT.FID_FEATURE → TC_RL_MEASUREMENT_LINE.FID
View TC_M_RL_STRUCTURE updated: displays structure type name via COALESCE lookup (manhole, pole, and cabinet types)
SplitMode rules for segment splitting added to various foreign key relationships (including TC_RL_CABLE, TC_RL_DUCT, TC_RL_ATTRIBUTE, TC_RL_MEASUREMENT_POINT → TC_RL_SEGMENT)

We don't have a way to export this macro.

Changes to Dialog Definitions since NET 15.0

NET Engineering

Base Datamodel

15.1

The fields Source Datastore (FID_TNIM_SOURCE) and Source ID (TNIM_SOURCE_KEY) have been removed from the following dialogs:
- Cluster (TC_CLUSTER)
- Edge (TC_LINE)
- Person (TC_PERSON)
- Node (TC_POINT)
- Cabinet Type (TC_SP_CABINET_MODEL)
- Manhole Type (TC_SP_MANHOLE_MODEL)
- Marker (TC_SP_MARKER)
- Marker Type (TC_SP_MARKER_MODEL)
- Patch Panel (TC_SP_PATCH_PANEL)
- Patch Panel Type (TC_SP_PATCH_PANEL_MODEL)
- Pole Type (TC_SP_POLE_MODEL)
- Rack Panel (TC_SP_RACK_PANEL)
- Rack Panel Type (TC_SP_RACK_PANEL_MODEL)
- Segment Type (TC_SP_SEGMENT_MODEL)
- Switching Point Type (TC_SWITCHING_POINT_MODEL)
- Building (TC_TG_BUILDING)
The dialogs for Cluster (TC_CLUSTER) and Action Area (TC_ACTION_AREA) have been aligned.
- Changes to Action Area
  - Layout aligned with the Cluster dialog
  - FID field has been hidden
  - Jump buttons to Building, Node, and Edge added
  - Document management button added
- Changes to both Action Area and Cluster
  - Buttons for "Show statistics", "Export bill of materials", and "Update status" have been removed and are now available from the menu bar
New attribute for placement distance in Breakdown (TC_BREAKDOWN) added

15.3

In the Building dialog (TC_TG_BUILDING):
- New counter for building units ($SQLLABELBUILDINGUNITCOUNT) added
- New projection button to building units (TC_TG_BUILDING_UNIT) added. Linked building units can now be opened directly via the projection button.

Duct Datamodel

15.1

The fields Source Datastore (FID_TNIM_SOURCE) and Source ID (TNIM_SOURCE_KEY) have been removed from the following dialogs:
- Duct Bundle (TC_SP_DUCT_BUNDLE)
- Duct Insertion Type (TC_SP_DUCT_INSERTION_MDL)
- Duct Type (TC_SP_DUCT_TYPE)
- Fitting Type (TC_SP_FITTING_MODEL)

15.2

In the Duct dialog (TC_SP_DUCT):
- The projection "List all inner ducts of the filtered ducts" has been removed and replaced by two more specific projections:
  - "List all direct inner ducts of the filtered ducts"
  - "List all direct parent ducts of the filtered ducts" (new)
- The new action "Set duct insertion" is available in the Edit menu
In the Segment dialog (TC_SP_SEGMENT):
- The new action "Set duct insertion" is available in the Edit menu
In the Structural Node dialog (TC_SP_StructuralNode):
- The new action "Set duct insertion" is available in the Edit menu (if duct datamodel is present)
In the Building dialog (TC_TG_BUILDING, survey plan):
- The new action "Set duct insertion" is available in the Edit menu (if duct datamodel is present)
In the Duct Type dialog (TC_SP_DUCT_TYPE):
- The action "Adjust ducts" now requires view mode and an available record

15.3

No changes to dialogs

Fiber Optic Datamodel

15.1

The fields Source Datastore (FID_TNIM_SOURCE) and Source ID (TNIM_SOURCE_KEY) have been removed from the following dialogs:
- FO Cable Type (TC_FO_CABLE_MODEL)
- FO Closure Type (TC_FO_CLOSURE_MODEL)
- FO Connector Type (TC_FO_CONNECTOR_MODEL)
- FO Fiber Type (TC_FO_FIBER_MODEL)
- FO Splitter Type (TC_FO_SPLITTER_MODEL)
- FO Terminator Type (TC_FO_TERMINATOR_MODEL)
- FO Tray (TC_FO_TRAY)
- FO Tray Type (TC_FO_TRAY_MODEL)
- FO Trunk (TC_FO_TRUNK)
The SQL filters for "Show splices" and "Show filed splices" in the FO Splice dialog (TC_FO_SPLICE) have been corrected.
In the FO ONT (TC_FO_ONT) and FO ONT Type (TC_FO_ONT_MODEL) dialogs, the reference to the online help has been added.

15.2

In the FO Patch dialog (TC_FO_PATCH):
- The Active checkbox is now locked and can no longer be edited directly
- A duplicate separator in the Edit menu has been removed
In the FO Splice dialog (TC_FO_SPLICE):
- The Active checkbox is now locked and can no longer be edited directly
- Double-clicking the Tray ComboBox now opens the Tray dialog instead of the View
In the FO Fiber dialog (TC_FO_FIBER):
- Name and Color are now locked when the corresponding FO Cable Type has "Fiber name" or "Fiber color" set
In the FO Cable Type dialog (TC_FO_CABLE_MODEL):
- The action "Adjust cable sections" now requires view mode and an available record
- The behavior has been aligned with the "Adjust ducts" action in the Duct Type dialog
In the FO Terminator dialog (TC_FO_TERMINATOR):
- The new action "Set duct insertion" is available in the Edit menu (if duct datamodel is present)

15.3

In the FO ONT dialog (TC_FO_ONT):
- New fields DATE_CREATION (Creation date) and DATE_SHUTDOWN (Shutdown date) added
In the FO ONT sub-dialog at Building (TC_TG_BUILDING#TC_FO_ONT):
- New fields DATE_CREATION (Creation date) and DATE_SHUTDOWN (Shutdown date) added
In the FO ONT sub-dialog at Building Unit (TC_TG_BUILDING_UNIT#TC_FO_ONT):
- New fields DATE_CREATION (Creation date) and DATE_SHUTDOWN (Shutdown date) added
In the Building dialog (TC_TG_BUILDING, FO extension):
- The counter and jump button for building units has been removed (moved to the base datamodel, now available there with an enabled projection button)

Telephony Datamodel

15.1

The fields Source Datastore (FID_TNIM_SOURCE) and Source ID (TNIM_SOURCE_KEY) have been removed from the following dialogs:
- TP Cable Type (TC_TP_CABLE_MODEL)
- TP Closure Type (TC_TP_CLOSURE_MODEL)
- TP Pin Type (TC_TP_PIN_MODEL)
- TP Terminator Type (TC_TP_TERMINATOR_MODEL)
- TP Wire Type (TC_TP_WIRE_MODEL)

15.2

In the TP Patch dialog (TC_TP_PATCH):
- The Active checkbox is now locked and can no longer be edited directly
- A duplicate separator in the Edit menu has been removed
In the TP Splice dialog (TC_TP_SPLICE):
- The Active checkbox is now locked and can no longer be edited directly
In the TP Wire dialog (TC_TP_WIRE):
- Name and Color are now locked when the corresponding TP Cable Type has "Wire name" or "Wire color code" set
In the TP Cable Type dialog (TC_TP_CABLE_MODEL):
- The action "Adjust cable sections" now requires view mode and an available record
- The behavior has been aligned with the "Adjust ducts" action in the Duct Type dialog
In the TP Terminator dialog (TC_TP_TERMINATOR):
- The new action "Set duct insertion" is available in the Edit menu (if duct datamodel is present)

15.3

No changes to dialogs

Redlining Datamodel

15.1

New fields for NET Scan links in Redlining Measurement (TC_RL_MEASUREMENT) added.
- $SQLLABELSCANCOUNT (Count of linked scans)
- $SQLLABELSCANCOUNTNEW (New scans since last sync)
- $REF_TC_RL_SCAN (Jump button to scans)
- $REF_TC_RL_SCAN_NEW (Jump button to new scans)
Help link added:
- Redlining Building (TC_RL_BUILDING)
- Redlining Building Unit (TC_RL_BUILDING_UNIT)
- Redlining Cluster (TC_RL_CLUSTER)
- Redlining Duct (TC_RL_DUCT)

15.2

New fields added in the following dialogs:
- RL Cable (TC_RL_CABLE): INFO field added
- RL Closure (TC_RL_CLOSURE): INFO field added
- RL Duct (TC_RL_DUCT): INFO field added
- RL Fitting (TC_RL_FITTING): INFO and NAME fields added
- RL Segment (TC_RL_SEGMENT): USER_LENGTH and WIDTH fields added
- RL Structure (TC_RL_STRUCTURE): INFO field added
- RL Terminator (TC_RL_TERMINATOR): INFO field added
FID_SCAN field removed from the following dialogs:
- RL Cable (TC_RL_CABLE)
- RL Closure (TC_RL_CLOSURE)
- RL Duct (TC_RL_DUCT)
- RL Fitting (TC_RL_FITTING)
- RL Measurement Line (TC_RL_MEASUREMENT_LINE)
- RL Measurement Point (TC_RL_MEASUREMENT_POINT)
- RL Segment (TC_RL_SEGMENT)
- RL Structure (TC_RL_STRUCTURE)
- RL Terminator (TC_RL_TERMINATOR)
RL Scan dialog (TC_RL_SCAN) completely removed (moved to the separate NET Scan datamodel)

15.3

New dialog: Redlining ONT (TC_RL_ONT)
- Fields: FID_MEASUREMENT (Measurement), ID, NAME, TYPE, SOURCE_OBJECT (source reference), CONNECTOR_NR (connector number), UNIT_NR (unit number), FID_RL_BUILDING (building)
- Document management and projection to Redlining Attributes (TC_RL_ATTRIBUTE)
In the RL Building dialog (TC_RL_BUILDING):
- New jump button to Redlining ONTs (TC_RL_ONT) added
In the RL Building Unit dialog (TC_RL_BUILDING_UNIT):
- Fields ONT_TYPE and ONT_NR removed (moved to the new ONT dialog)
In the RL Closure dialog (TC_RL_CLOSURE):
- New field DATE_COMPLETION (Constructed on) added
In the RL Measurement dialog (TC_RL_MEASUREMENT):
- New counter and jump row for ONTs added (total count and count of new ONTs since last sync)
In the RL Attribute dialog (TC_RL_ATTRIBUTE):
- TC_RL_ONT added as additional parent table for FID_FEATURE (attributes can now also be linked to ONTs)
In the RL Measurement Point dialog (TC_RL_MEASUREMENT_POINT):
- TC_RL_MEASUREMENT_LINE added as additional parent table for FID_FEATURE
Label of DATE_COMPLETION in the following dialogs changed from "Completed on" to "Constructed on":
- RL Segment (TC_RL_SEGMENT)
- RL Structure (TC_RL_STRUCTURE)
- RL Terminator (TC_RL_TERMINATOR)

Report Changes since NET 15.0

NET Engineering

Fiber Optic Datamodel

15.1

Report "NET Cable Costs"
- Display of the status category
- Display of total length and total costs by status category
Report "NET FO Splice Overview Terminator"
- SQL error in the report corrected
Report "NET FO Splice Plan Closure"
- Dynamic row height removed
- Dynamic word wrapping implemented

15.2

Report "NET Cable Costs"
- Oracle compatibility established (database-specific SQL syntax for Oracle and PostgreSQL/SQLite)

15.3

Report "NET FO Splice Plan"
- WordWrap in detail columns disabled and replaced with wrapText function for correct display at all Windows display scaling settings
- Font size and field widths in header fields (Closure, Info, Closure type, Address) adjusted
Report "NET FO Splice Plan Landscape"
- WordWrap in detail columns disabled and replaced with wrapText function for correct display at all Windows display scaling settings
- Font size and field widths in header fields (Closure, Info, Closure type, Address, Page) adjusted

Base Datamodel

15.2

Report "NET Network Overview Service"
- All data fields now use dynamic word wrapping (wrapText function) for correct display in cells

15.3

Report "NET Network Overview Service"
- WordWrap in detail columns disabled and replaced with wrapText function for correct display at all Windows display scaling settings
- Font size and field widths in the fields Start Feature Class, Tracing Start Point, and Location adjusted

Duct Datamodel

15.3

Report "NET Duct End Overview"
- WordWrap in detail columns disabled and replaced with wrapText function for correct display at all Windows display scaling settings

Connector Overview (CO Overview)

15.2

New column "Ducts" with full duct hierarchy display (instead of a single duct, all nested ducts are now shown with arrow separation)
New columns "ONT ID" and "ONT" for displaying ONT information
Excel export now preserves the original cell background colors
Improved tracing direction detection for terminators without building assignment
Extended error messages for various tracing scenarios
HiDPI scaling support for the tracing report window